Thermic Edge 4U Power Supply & Heater Controller

Old, Heavy & Awkward AC Power Supplies Are Dead!

AC power supplies are inordinately heavy, extremely bulky, expensive to ship and repair and just plain outdated! DC power supplies, due to their stable current, offer a simple answer to your pain-staking power problems. They don’t require a transformer, so are far lighter than AC PSUs while also trumpeting a much smaller footprint in the workplace. The Thermic Edge power supplies are an uncompromising solution to powering and controlling every and any heating element possible. For those that want the combined genius of our high-standard power supplies with the pin-point accuracy of our heater controllers- this is the best solution.

Introducing the Thermic Edge 4U Power Supply & Heater Controller Combo. Unit

4U Full Rack Heater Controller & Power Supply Thermic Edge

Thermic Edge currently offers 3U half-rack and 4U full-rack options with our very own power supply/heater controller dual system.

If you want to opt for a higher current, then stepping up to a 4U full rack enclosure will give you ample space to step it up to a maximum of 50A, over the 13A maximum on our 3U half rack range of enclosures. Though still including all of the key features from our 3U range such as auto tuning power output to avoid overshooting, maintaining desired temperatures, and a safety interlock, to name a few, this option offers 4KW of maximum power output, meaning it will be enough to deliver the correct amount of power to any and all elements using burst-fire thyristors, which also means there’s no chance of high current surges or high levels of noise coming back through the mains, which can cause interference with other devices.

Thermic Edge Sample Heater Controller And Power Supply Combo System

Features:
• Max. Output power reaches 4000W.
• Overheat & Over-current protection.
• Alternative PID controllers such as RKC or West may be used.
• All controllers have a 24V interlock circuit, which will cut the power output if the circuit is broken. This can be used to interlock many safety features such as lid closed, water flow, high vacuum enabled, over temperature etc.
• Remote control is available.
• Fitted with Eurotherm PID accurate temperature controllers, although alternative PID controllers such as RKC or West may be used.
• Controllers are fitted with 0 volt firing solid state relays, reducing noise, power surges and potential arcing on the heater.
• Auto tuning function to dynamically tailor power output to the heater’s environment, thus avoiding overshooting during temperature ramping- saving on energy, time and money.

Thermic Edge 4U Full Rack Back Heater Controller & Power Supply Combo System

For full specifications of our 4U Full Rack Heater Controller / Power Supply combo, view our brochure.

Click here to view our PDF of our heater controller / power supply combo system.

Download

For full specifications of our 3U Half Rack Heater Controller / Power Supply combo, view our brochure.

Click here to view our PDF of our heater controller / power supply combo system.

Download

Thermic Edge SMP DC Power Supplies

5000 Series

The Thermic Edge SMP5000 series switching mode DC power supplies can reach a maximum output of 6KW (DC). Its output voltage and current are both adjustable, making it great for CV/CC output precision, low ripple and high efficiency operation.

Thermic Edge SMP560A DC Power Supply
Above pictured, is the SMP560A DC power supply.

Features:
• Max. Output power reaches 6000W.
• CV / CC working modes, auto-switchable between two modes.
• Output voltage & current 3 1/2” LED display.
• Intelligent fan cooling to withstand continuous working.
• Adaptability to continuous or dynamic loads.
• Overheat & Over-current protection.
• Standard power supply enclosure (434 x 185 x 400 mm).
• Low ripple and noise.
• Voltage & Current continuously adjustable, 10-turn potentiometer setting.

Applications:
• Heater’s power supply.
• LED, motors and DC fans test.
• Accumulator charging.
• Labs, factories and universities.
• Small electrolysis or electroplating system.
• Burn-in tests for products, such as DC motors & fans, resistors and capacitors etc.

Thermic Edge SMP560A Power Supply Back

You can use this Power Supply in conjunction with the Thermic Edge heater controller, fitted with a PID controller to accurately (and automatically) tune the heater to its environment to control heater ramping and set points without overshooting.

The 5000 Series power supplies have many great, high-end applications. More information is included in our PDF brochure.

Click here to view our PDF on the 5000 series power supplies.

Download

Thermic Edge SMP DC Power Supplies

4000 Series

The Thermic Edge SMP4000 series power supplies brings all of the best quality components, that make the 5000 series so great, down a scale where there is a max power output of 3KW in a smaller 434 x 110 x 400 mm footprint.

The Thermic Edge SMP4000 series switching mode DC power supplies can reach a maximum output of 3KW (DC). Its output voltage and current are both adjustable, making it great for CV/CC output precision, low ripple and high efficiency operation (up to 94%).

SMP4000 Series Switching Mode Power Supply Front

 

Features:
• Max. Output power reaches 3000W.
• CV / CC working modes, auto-switchable between two modes.
• Voltage & Current continuously adjustable, 10-turn potentiometer setting.
• Output voltage & current 3 1/2” LED display.
• Intelligent fan cooling to withstand intensive, long loads.
• Adaptability for continuous or dynamic loads.
• Overheat & Over-current protection.
• Standard power supply enclosure (205 x 165 x 380 mm).
• Low ripple and noise.

Applications:
• LED, motors and DC fans test.
• Accumulator charging.
• Labs, factories and universities.
• Small electrolysis or electroplating system.
• Burn-in tests for products, such as DC motors & fans, resistors and capacitors etc.

Thermic Edge SMP 4000 Series Switching Mode DC Power Supply Back

The 4000 Series power supplies have many great, high-end applications. More information is included in our PDF brochure.

Click here to view our PDF on the 4000 series power supplies.

Download

If you wish to make an enquiry or get in touch with us here at Thermic Edge, please use our contact block below.

  • This field is for validation purposes and should be left unchanged.
Responsive website designed & developed by
×